HP Color LaserJet CP1518ni printer prints the ghost image of the page

Favorites Email to a friend Date: 17/6/2010
Print the ghost image, fuzzy of the page in symptom. The reason selenium drum of the trouble goes wrong. Have not carried out and regulated. SolutionStep one: Change the selenium drumAs to Africa Hewlett-Packard (HP) The original packaging selenium drum, Hewlett-Packard does not offer the quality or dependability guarantee. In order to guarantee good printing quality, propose using Hewlett-Packard (HP) Original packaging selenium drum. If has already irritated the powder to the selenium drum again, please change drum of this selenium.Step two: Carry out and regulate
    Press " OK " Press the button, enter the main menu of control panel. The arrowhead presses the button, look over " Reports (report) " The menu, then press " OK " Press the button. The arrowhead presses the button, look over " Diagnostics page (diagnose the P) " The menu, then press " OK " Press the button. The printer begins to print the trouble clearing page of quality, there is no aline between two parties in the piece position of color printed on the page, in this way, will lead to the fact that print the ghost image, fuzzy. Such as pursuing The piece position of color is shown before a calibration:Fig. 1: Piece position of color before regulatingPress the arrowhead button, look over " System setup (set up systematically) " The menu, then press " OK " Press the button. Press the arrowhead button, look over " Print quality (print quality) " The menu, then press " OK " Press the button. Press the arrowhead button, look over " Calibrate color (regulate the color) " The menu, then press " OK " Press the button. Press the arrowhead button, choose " Calibrate now (regulate immediately) " One, then press " OK " Press the button. The liquid crystal of control panel rejects and reveals " Calibratin ..." . The printer begins to carry out and regulate. Wait for for a moment, the liquid crystal of control panel rejects and reveals " Ready " ,Finish regulating. Regulate, print the trouble clearing page of quality, the aline between two parties of piece position of color printed on the page again. Such as pursuing The piece position of color is shown after 2 calibration:Fig. 2: Piece position of color after regulatingNote:If there is no aline between two parties in the piece position of color printed on the page after regulating, but improve to some extent, can try to regulate again. At this moment, you can send and print the task again, look over whether it is normal to print the page.
Step three: Contact Hewlett-Packard (HP)If after operating according to the above-mentioned method, print still ghost image, fuzzy of the page, please contact the closest maintenance center to gauge printer.
TAG: Ghost ghost HP hp Hp image Image CP1518ni



Previous Next